Wifi Absent

Demande d'aide : c'est ici.
Répondre
jandelalune
Membre
Membre
Messages : 144
Enregistré le : 29 janv. 2018, 19:01
Status : Hors ligne

Salut à tous

Me voilà de retour pour une difficulté avec le wifi de mon ordinateur HP Victus sous debian 11

A / mon souci :
L’interface graphique ne me permet pas d’accéder au Wifi 6 dont doit être équipé mon ordinateur en dual boot W11 (préinstallé ) et debian 11

Sur le forum ou j’ai trouvé un sujet apparemment semblable au mien qui m’a permis de creuser le sujet, (viewtopic.php?p=26617&hilit=debian+11+W ... ent#p26617)
et de faire les recherches préliminaires suivantes :

B /

Code : Tout sélectionner

gerard@VICTUSG:~$ lspci -nnkd ::0280
03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:8852]
	DeviceName: Realtek Wireless LAN + BT
	Subsystem: Hewlett-Packard Company Device [103c:88e1]
gerard@VICTUSG:~$ 
semblent confirmer que j’ai une carte réseau avec le Wifi, 

mon debian
1 /
[code]
root@VICTUSG:~# uname -a
Linux VICTUSG 5.10.0-13-amd64 #1 SMP Debian 5.10.106-1 (2022-03-17) x86_64 GNU/Linux
root@VICTUSG:~#  
2 /

Code : Tout sélectionner

root@VICTUSG:~# lsb_release -a
No LSB modules are available.
Distributor ID:	Debian
Description:	Debian GNU/Linux 11 (bullseye)
Release:	11
Codename:	bullseye
root@VICTUSG:~#  
3 /

Code : Tout sélectionner

root@VICTUSG:~# apt-cache policy
Fichiers du paquet :
 100 /var/lib/dpkg/status
     release a=now
 500 http://deb.debian.org/debian bullseye-updates/main amd64 Packages
     release v=11-updates,o=Debian,a=stable-updates,n=bullseye-updates,l=Debian,c=main,b=amd64
     origin deb.debian.org
 500 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages
     release v=11,o=Debian,a=stable-security,n=bullseye-security,l=Debian-Security,c=main,b=amd64
     origin deb.debian.org
 500 http://deb.debian.org/debian bullseye/non-free amd64 Packages
     release v=11.3,o=Debian,a=stable,n=bullseye,l=Debian,c=non-free,b=amd64
     origin deb.debian.org
 500 http://deb.debian.org/debian bullseye/contrib amd64 Packages
     release v=11.3,o=Debian,a=stable,n=bullseye,l=Debian,c=contrib,b=amd64
     origin deb.debian.org
 500 http://deb.debian.org/debian bullseye/main amd64 Packages
     release v=11.3,o=Debian,a=stable,n=bullseye,l=Debian,c=main,b=amd64
     origin deb.debian.org
Paquets épinglés :
root@VICTUSG:~# 
4 /

Code : Tout sélectionner

gerard@VICTUSG:~$ su -
Mot de passe : 
root@VICTUSG:~# apt-cache policy wireless-tools
wireless-tools:
  Installé : 30~pre9-13.1
  Candidat : 30~pre9-13.1
 Table de version :
 *** 30~pre9-13.1 500
        500 http://deb.debian.org/debian bullseye/main amd64 Packages
        100 /var/lib/dpkg/status
root@VICTUSG:~# 
que je ne sais pas interpréter ou utiliser en l’état

5 /J’ai par ailleurs, suite à mes lectures sur internet Installé le micro logiciel firmware-iwlwifi

Code : Tout sélectionner

root@VICTUSG:~# apt install firmware-iwlwifi
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  linux-headers-5.10.0-11-amd64 linux-headers-5.10.0-11-common
  linux-image-5.10.0-11-amd64
Veuillez utiliser « apt autoremove » pour les supprimer.
Les NOUVEAUX paquets suivants seront installés :
  firmware-iwlwifi
0 mis à jour, 1 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 13,4 Mo dans les archives.
Après cette opération, 117 Mo d'espace disque supplémentaires seront utilisés.
Réception de :1 http://deb.debian.org/debian bullseye/non-free amd64 firmware-iwlwifi all 20210315-3 [13,4 MB]
13,4 Mo réceptionnés en 11s (1 228 ko/s)                                       
Sélection du paquet firmware-iwlwifi précédemment désélectionné.
(Lecture de la base de données... 279982 fichiers et répertoires déjà installés.
)
Préparation du dépaquetage de .../firmware-iwlwifi_20210315-3_all.deb ...
Dépaquetage de firmware-iwlwifi (20210315-3) ...
Paramétrage de firmware-iwlwifi (20210315-3) ...
root@VICTUSG:~# 
mais sans résultats probants : toujours pas de wifi

Je viens chercher auprès de vous des conseils , des idées pour me sortir de cet imbroglio

Merci d’avance à tous ceux qui voudront bien s’intéresser à mon sujet

Cordialement
Fañch
Membre
Membre
Messages : 32
Enregistré le : 10 août 2016, 18:48
Localisation : Finistère
Contact :
Status : Hors ligne

Bonjour,
Peut-être qu'en installant le paquet firmware-realtek. Il est dans les dépôts non-free.
Cordialement,
Fañch.
jandelalune
Membre
Membre
Messages : 144
Enregistré le : 29 janv. 2018, 19:01
Status : Hors ligne

Merci Fanch pour ta réponse

Il est déjà installé :

Code : Tout sélectionner

root@VICTUSG:~# apt install firmware-realtek
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
firmware-realtek est déjà la version la plus récente (20210315-3).
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  linux-headers-5.10.0-11-amd64 linux-headers-5.10.0-11-common
  linux-image-5.10.0-11-amd64
Veuillez utiliser « apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
root@VICTUSG:~# 
Cordialement
Avatar du membre
piratebab
Site Admin
Site Admin
Messages : 3902
Enregistré le : 24 avr. 2016, 18:41
Localisation : sud ouest
Status : Hors ligne

pour vérifier si c'est un probleme de firmware:

Code : Tout sélectionner

# dmesg | grep firmw
regarde aussi dans la sortie complete de dmesg si tu as des erreurs relatives au wifi
jandelalune
Membre
Membre
Messages : 144
Enregistré le : 29 janv. 2018, 19:01
Status : Hors ligne

Merci pour ta réponse piratebab

C'est un controle que j'ai fait dans ma démarche initiale mais que j'ai oublié de rapporter. Je n'ai rien trouvé en rapport avec le wifi : cf ci dessous ?

Code : Tout sélectionner

root@VICTUSG:~# dmesg | grep firmw
[    0.055228] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    1.590257] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_sdma.bin
[    1.590575] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_asd.bin
[    1.590587] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_ta.bin
[    1.590605] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_pfp.bin
[    1.590618] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_me.bin
[    1.590627] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_ce.bin
[    1.590637] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_rlc.bin
[    1.590673] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_mec.bin
[    1.590707] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_mec2.bin
[    1.591198] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_dmcub.bin
[    1.591199] [drm] Loading DMUB firmware via PSP: version=0x0101000A
[    1.591248] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_vcn.bin
[    1.591250] [drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 17
[    1.591252] amdgpu 0000:06:00.0: amdgpu: Will use PSP to load VCN firmware
[    3.635646] Bluetooth: hci0: RTL: assuming no firmware upload needed
[    4.005518] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
[ 6347.339037] Bluetooth: hci0: RTL: assuming no firmware upload needed
root@VICTUSG:~# 
Cordialement
Avatar du membre
dezix
Modérateur
Modérateur
Messages : 1975
Enregistré le : 04 juin 2016, 14:50
Status : Hors ligne

Bonjour,

Dans le sujet que tu mets en lien dans ton postage initial, on peut lire :
Coq a écrit : ↑

j'ai testé en désactivant Secure Boot dans le BIOS, avec succès ! Le module est chargé au démarrage du système et le WiFi fonctionne !

Si j'ai bonne mémoire ??? on a déjà passé un bon moment à tourner en rond pour une carte Nvidia qui ne fonctionnait pas car SecureBoot faisait obstacle au pilote non-signé.

Alors sans trop vouloir m'avancer et si le paquet du firmware est correctement installé,
je pencherais pour cette piste en premier.
Debian stable - XFCE
jandelalune
Membre
Membre
Messages : 144
Enregistré le : 29 janv. 2018, 19:01
Status : Hors ligne

Salut piratebab
piratebab a écrit : 06 avr. 2022, 09:42
regarde aussi dans la sortie complete de dmesg si tu as des erreurs relatives au wifi
J'ai essayé mais je ne sais pas Faire : un coup de main supplémentaire serait nécessaire !!

En outre je ne suis pas sur que je saurai exploiter les résultats : à voir ?

Merci d'avance
Avatar du membre
dezix
Modérateur
Modérateur
Messages : 1975
Enregistré le : 04 juin 2016, 14:50
Status : Hors ligne

jandelalune a écrit : 06 avr. 2022, 17:03 J'ai essayé mais je ne sais pas Faire
Suivant l'exemple :
piratebab a écrit : 06 avr. 2022, 09:42 # dmesg | grep firmw
qui est une construction (commande complexe) que l'on nomme une conduite (en anglais : pipe )
le modèle est :

<commande1> | <commande2>

le résultat est que la sortie de la 1ère commande sert d'entrée à la seconde.

Ici :
... une autre conduite qui envoie la sortie de man vers head affiche les premières lignes d'un fichier, l'option -n 4 précise le nombre de lignes du manuel à afficher : 4

Code : Tout sélectionner

$ man dmesg | head -n 4
DMESG(1) 	Commandes de l'utilisateur 	DMESG(1)
NOM

dmesg - Afficher et contrôler le tampon circulaire du noyau
Donc dmesg (grosso-modo) => affiche les messages émis par le noyau lors de son exécution.

et

Code : Tout sélectionner

$ man grep | head -n 4
GREP(1) 	Commandes de l'utilisateur 	GREP(1)
NOM

grep, egrep, fgrep, rgrep - Afficher les lignes correspondant à un motif donné
Donc grep est une commande qui filtre les lignes fournies en entrée selon un motif et les options passés en argument.

Voir $ man grep pour une description complète.

La commande fournie par Piratebab permet donc d'afficher les (lignes) messages du noyau comportant le motif firmw pour trouver des choses en rapport à "firmware"

Sur le même modèle,
pour n'afficher (filtrer) que les lignes correspondant à : error=erreur ; warning=avertissement ; fail(ed)=échoué/echec
on peut :

soit faire un filtrage pour chaque motif : # dmesg | grep error .... et ainsi de suite

soit créer une commande utilisant une Expression Rationnelle (ER ou Regex) qui est un motif "elastique"

ici : # dmesg | grep -Pi '(error|warn|fail)' qui va faire le filtrage sur les 3 motifs en 1 passe.


PS: on ne peut pas tout apprendre/comprendre d'un coup, mais il faut s'y mettre... progresssivemmment :dirol:
Debian stable - XFCE
Fañch
Membre
Membre
Messages : 32
Enregistré le : 10 août 2016, 18:48
Localisation : Finistère
Contact :
Status : Hors ligne

Il faut peut-être charger le firmware dans le noyau avec modprobe.
Cordialement,
Fañch.
PascalHambourg
Contributeur
Contributeur
Messages : 638
Enregistré le : 05 août 2016, 20:25
Status : Hors ligne

Fañch a écrit : 07 avr. 2022, 12:08 Il faut peut-être charger le firmware dans le noyau avec modprobe.
Non, modprobe sert à charger des modules du noyau, pas des firmwares. Ce sont les modules eux-mêmes qui demandent le chargement de firmwares le cas échéant.

Ici lspci -k ne retourne pas de ligne "kernel modules", ce qui indique qu'il n'y a pas de module pilote candidat pour ce contrôleur wifi. Soit le noyau est trop ancien (essayer celui des backports), soit il faut compiler un module externe (voir chez Realtek).
jandelalune
Membre
Membre
Messages : 144
Enregistré le : 29 janv. 2018, 19:01
Status : Hors ligne

@ piratebab

Je crois avoir compris ce que voulait dire "regarde aussi dans la sortie complete de dmesg si tu as des erreurs relatives au wifi"

J'ai donc fait :

Code : Tout sélectionner

 
 root@VICTUSG:~# dmesg
 


Deux problèmes :
le premier le résultat dépasse largement la limite de 65000 caractères
le second : j'ai bien regardé le résultat mais n'ai rien su en tirer d'utile

je l'ai donc partagé en espérant ne pas etre en contradiction avec les règles du Forum ???

Début

Code : Tout sélectionner

 
root@VICTUSG:~# dmesg
[    0.000000] Linux version 5.10.0-13-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.106-1 (2022-03-17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-13-amd64 root=UUID=db4446de-5bec-4ace-8432-f9196b1c7989 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009eeffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009ef0000-0x000000000a000fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a001000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20f000-0x00000000b6efbfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b6efc000-0x00000000b7052fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b7053000-0x00000000b70cdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b70ce000-0x00000000b72c1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b72c2000-0x00000000bcb83fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bcb84000-0x00000000bcbfdfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000bcbfe000-0x00000000bdffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe700000-0x00000000fe700fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc4000-0x00000000fedc9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedcc000-0x00000000fedcefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd5000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e2fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000041e300000-0x000000043fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI=0xb70cd000 ACPI 2.0=0xb70cd014 TPMFinalLog=0xb7277000 SMBIOS=0xbca12000 SMBIOS 3.0=0xbca11000 MEMATTR=0xb3b9c698 ESRT=0xb4174918 MOKvar=0xb3b6c000 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: HP Victus by HP Laptop 16-e0xxx/88EC, BIOS F.11 09/14/2021
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3293.906 MHz processor
[    0.000126] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000127] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000132] last_pfn = 0x41e300 max_arch_pfn = 0x400000000
[    0.000135] MTRR default type: uncachable
[    0.000136] MTRR fixed ranges enabled:
[    0.000136]   00000-9FFFF write-back
[    0.000137]   A0000-DFFFF uncachable
[    0.000137]   E0000-FFFFF write-protect
[    0.000138] MTRR variable ranges enabled:
[    0.000139]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000139]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000140]   2 base 00FF00000000 mask FFFFFE000000 write-through
[    0.000140]   3 base 00FE00000000 mask FFFF00000000 write-through
[    0.000141]   4 disabled
[    0.000141]   5 disabled
[    0.000141]   6 disabled
[    0.000141]   7 disabled
[    0.000142] TOM2: 0000000440000000 aka 17408M
[    0.000443] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000564] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[    0.003334] esrt: Reserving ESRT space from 0x00000000b4174918 to 0x00000000b4174950.
[    0.003338] e820: update [mem 0xb4174000-0xb4174fff] usable ==> reserved
[    0.003348] e820: update [mem 0xb3b6c000-0xb3b6efff] usable ==> reserved
[    0.003360] Using GB pages for direct mapping
[    0.003705] RAMDISK: [mem 0x2ffd1000-0x33fdffff]
[    0.003709] ACPI: Early table checksum verification disabled
[    0.003711] ACPI: RSDP 0x00000000B70CD014 000024 (v02 HPQOEM)
[    0.003714] ACPI: XSDT 0x00000000B70CC728 00010C (v01 HPQOEM SLIC-MPC 01072009 AMI  01000013)
[    0.003718] ACPI: FACP 0x00000000B70BD000 000114 (v06 HPQOEM SLIC-MPC 01072009 HP   00010013)
[    0.003720] ACPI: DSDT 0x00000000B70A3000 01920E (v02 HPQOEM 88EC     01072009 ACPI 20190509)
[    0.003722] ACPI: FACS 0x00000000B7275000 000040
[    0.003723] ACPI: MSDM 0x00000000B70CB000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00010013)
[    0.003725] ACPI: SSDT 0x00000000B70C3000 00723C (v02 HPQOEM 88EC     00000002 ACPI 04000000)
[    0.003727] ACPI: IVRS 0x00000000B70C2000 0001A4 (v02 HPQOEM 88EC     00000001 HP   00000000)
[    0.003728] ACPI: SSDT 0x00000000B70BE000 003A21 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003729] ACPI: FIDT 0x00000000B70A2000 00009C (v01 HPQOEM 88EC     01072009 HP   00010013)
[    0.003731] ACPI: MCFG 0x00000000B70A1000 00003C (v01 HPQOEM 88EC     01072009 HP   00010013)
[    0.003732] ACPI: HPET 0x00000000B70A0000 000038 (v01 HPQOEM 88EC     01072009 HP   00000005)
[    0.003733] ACPI: VFCT 0x00000000B7092000 00D884 (v01 HPQOEM 88EC     00000001 HP   31504F47)
[    0.003735] ACPI: SSDT 0x00000000B7091000 000060 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003736] ACPI: TPM2 0x00000000B7090000 00004C (v04 HPQOEM 88EC     00000001 HP   00000000)
[    0.003738] ACPI: SSDT 0x00000000B708C000 003E88 (v02 HPQOEM 88EC     00000001 ACPI 00000001)
[    0.003739] ACPI: CRAT 0x00000000B708B000 000B68 (v01 HPQOEM 88EC     00000001 HP   00000001)
[    0.003740] ACPI: CDIT 0x00000000B708A000 000029 (v01 HPQOEM 88EC     00000001 HP   00000001)
[    0.003742] ACPI: SSDT 0x00000000B7087000 002C78 (v01 HPQOEM 88EC     00001000 ACPI 20190509)
[    0.003743] ACPI: SSDT 0x00000000B7086000 000149 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003745] ACPI: SSDT 0x00000000B7085000 000641 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003746] ACPI: SSDT 0x00000000B7084000 00064F (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003747] ACPI: SSDT 0x00000000B7082000 00148E (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003749] ACPI: SSDT 0x00000000B7080000 001515 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003750] ACPI: SSDT 0x00000000B707F000 00062D (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003751] ACPI: SSDT 0x00000000B7079000 0036E9 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003753] ACPI: WSMT 0x00000000B707E000 000028 (v01 HPQOEM 88EC     01072009 HP   00010013)
[    0.003754] ACPI: APIC 0x00000000B707D000 0000DE (v03 HPQOEM 88EC     01072009 HP   00010013)
[    0.003756] ACPI: SSDT 0x00000000B7078000 00008D (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003757] ACPI: SSDT 0x00000000B7077000 0008A8 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003758] ACPI: SSDT 0x00000000B7075000 00108C (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003760] ACPI: FPDT 0x00000000B7074000 000044 (v01 HPQOEM 88EC     01072009 HP   01000013)
[    0.003761] ACPI: BGRT 0x00000000B7073000 000038 (v01 HPQOEM 88EC     01072009 HP   00010013)
[    0.003762] ACPI: Reserving FACP table memory at [mem 0xb70bd000-0xb70bd113]
[    0.003763] ACPI: Reserving DSDT table memory at [mem 0xb70a3000-0xb70bc20d]
[    0.003763] ACPI: Reserving FACS table memory at [mem 0xb7275000-0xb727503f]
[    0.003764] ACPI: Reserving MSDM table memory at [mem 0xb70cb000-0xb70cb054]
[    0.003764] ACPI: Reserving SSDT table memory at [mem 0xb70c3000-0xb70ca23b]
[    0.003765] ACPI: Reserving IVRS table memory at [mem 0xb70c2000-0xb70c21a3]
[    0.003765] ACPI: Reserving SSDT table memory at [mem 0xb70be000-0xb70c1a20]
[    0.003766] ACPI: Reserving FIDT table memory at [mem 0xb70a2000-0xb70a209b]
[    0.003766] ACPI: Reserving MCFG table memory at [mem 0xb70a1000-0xb70a103b]
[    0.003766] ACPI: Reserving HPET table memory at [mem 0xb70a0000-0xb70a0037]
[    0.003767] ACPI: Reserving VFCT table memory at [mem 0xb7092000-0xb709f883]
[    0.003767] ACPI: Reserving SSDT table memory at [mem 0xb7091000-0xb709105f]
[    0.003768] ACPI: Reserving TPM2 table memory at [mem 0xb7090000-0xb709004b]
[    0.003768] ACPI: Reserving SSDT table memory at [mem 0xb708c000-0xb708fe87]
[    0.003769] ACPI: Reserving CRAT table memory at [mem 0xb708b000-0xb708bb67]
[    0.003769] ACPI: Reserving CDIT table memory at [mem 0xb708a000-0xb708a028]
[    0.003769] ACPI: Reserving SSDT table memory at [mem 0xb7087000-0xb7089c77]
[    0.003770] ACPI: Reserving SSDT table memory at [mem 0xb7086000-0xb7086148]
[    0.003770] ACPI: Reserving SSDT table memory at [mem 0xb7085000-0xb7085640]
[    0.003771] ACPI: Reserving SSDT table memory at [mem 0xb7084000-0xb708464e]
[    0.003771] ACPI: Reserving SSDT table memory at [mem 0xb7082000-0xb708348d]
[    0.003772] ACPI: Reserving SSDT table memory at [mem 0xb7080000-0xb7081514]
[    0.003772] ACPI: Reserving SSDT table memory at [mem 0xb707f000-0xb707f62c]
[    0.003773] ACPI: Reserving SSDT table memory at [mem 0xb7079000-0xb707c6e8]
[    0.003773] ACPI: Reserving WSMT table memory at [mem 0xb707e000-0xb707e027]
[    0.003773] ACPI: Reserving APIC table memory at [mem 0xb707d000-0xb707d0dd]
[    0.003774] ACPI: Reserving SSDT table memory at [mem 0xb7078000-0xb707808c]
[    0.003774] ACPI: Reserving SSDT table memory at [mem 0xb7077000-0xb70778a7]
[    0.003775] ACPI: Reserving SSDT table memory at [mem 0xb7075000-0xb707608b]
[    0.003775] ACPI: Reserving FPDT table memory at [mem 0xb7074000-0xb7074043]
[    0.003776] ACPI: Reserving BGRT table memory at [mem 0xb7073000-0xb7073037]
[    0.003786] ACPI: Local APIC address 0xfee00000
[    0.003828] No NUMA configuration found
[    0.003829] Faking a node at [mem 0x0000000000000000-0x000000041e2fffff]
[    0.003834] NODE_DATA(0) allocated [mem 0x41e2d6000-0x41e2fffff]
[    0.004012] Zone ranges:
[    0.004013]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.004013]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.004014]   Normal   [mem 0x0000000100000000-0x000000041e2fffff]
[    0.004015]   Device   empty
[    0.004015] Movable zone start for each node
[    0.004017] Early memory node ranges
[    0.004017]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.004018]   node   0: [mem 0x0000000000100000-0x0000000009eeffff]
[    0.004018]   node   0: [mem 0x000000000a001000-0x000000000a1fffff]
[    0.004018]   node   0: [mem 0x000000000a20f000-0x00000000b6efbfff]
[    0.004019]   node   0: [mem 0x00000000bcbfe000-0x00000000bdffffff]
[    0.004019]   node   0: [mem 0x0000000100000000-0x000000041e2fffff]
[    0.004021] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e2fffff]
[    0.004022] On node 0 totalpages: 4023421
[    0.004022]   DMA zone: 64 pages used for memmap
[    0.004023]   DMA zone: 25 pages reserved
[    0.004023]   DMA zone: 3999 pages, LIFO batch:0
[    0.004024]   DMA32 zone: 11720 pages used for memmap
[    0.004024]   DMA32 zone: 750046 pages, LIFO batch:63
[    0.004024]   Normal zone: 51084 pages used for memmap
[    0.004025]   Normal zone: 3269376 pages, LIFO batch:63
[    0.004026] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004039] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.004158] On node 0, zone DMA32: 273 pages in unavailable ranges
[    0.007258] On node 0, zone DMA32: 15 pages in unavailable ranges
[    0.007407] On node 0, zone DMA32: 23810 pages in unavailable ranges
[    0.007611] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.007649] On node 0, zone Normal: 7424 pages in unavailable ranges
[    0.011078] ACPI: PM-Timer IO Port: 0x808
[    0.011081] ACPI: Local APIC address 0xfee00000
[    0.011088] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.011102] IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
[    0.011107] IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
[    0.011108] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.011110] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.011111] ACPI: IRQ0 used by override.
[    0.011111] ACPI: IRQ9 used by override.
[    0.011113] Using ACPI (MADT) for SMP configuration information
[    0.011114] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.011123] e820: update [mem 0xb2cef000-0xb32ddfff] usable ==> reserved
[    0.011134] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[    0.011157] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.011158] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.011159] PM: hibernation: Registered nosave memory: [mem 0x09ef0000-0x0a000fff]
[    0.011160] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20efff]
[    0.011161] PM: hibernation: Registered nosave memory: [mem 0xb2cef000-0xb32ddfff]
[    0.011162] PM: hibernation: Registered nosave memory: [mem 0xb3b6c000-0xb3b6efff]
[    0.011163] PM: hibernation: Registered nosave memory: [mem 0xb4174000-0xb4174fff]
[    0.011164] PM: hibernation: Registered nosave memory: [mem 0xb6efc000-0xb7052fff]
[    0.011164] PM: hibernation: Registered nosave memory: [mem 0xb7053000-0xb70cdfff]
[    0.011164] PM: hibernation: Registered nosave memory: [mem 0xb70ce000-0xb72c1fff]
[    0.011165] PM: hibernation: Registered nosave memory: [mem 0xb72c2000-0xbcb83fff]
[    0.011165] PM: hibernation: Registered nosave memory: [mem 0xbcb84000-0xbcbfdfff]
[    0.011166] PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
[    0.011166] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.011167] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.011167] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfcffffff]
[    0.011167] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xfdffffff]
[    0.011168] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe6fffff]
[    0.011168] PM: hibernation: Registered nosave memory: [mem 0xfe700000-0xfe700fff]
[    0.011168] PM: hibernation: Registered nosave memory: [mem 0xfe701000-0xfeb7ffff]
[    0.011168] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.011169] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.011169] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.011169] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.011170] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.011170] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.011170] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.011170] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.011171] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.011171] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc3fff]
[    0.011171] PM: hibernation: Registered nosave memory: [mem 0xfedc4000-0xfedc9fff]
[    0.011172] PM: hibernation: Registered nosave memory: [mem 0xfedca000-0xfedcbfff]
[    0.011172] PM: hibernation: Registered nosave memory: [mem 0xfedcc000-0xfedcefff]
[    0.011172] PM: hibernation: Registered nosave memory: [mem 0xfedcf000-0xfedd4fff]
[    0.011172] PM: hibernation: Registered nosave memory: [mem 0xfedd5000-0xfedd5fff]
[    0.011173] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.011173] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.011175] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.011176] Booting paravirtualized kernel on bare hardware
[    0.011179] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.013553] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.013883] percpu: Embedded 58 pages/cpu s200536 r8192 d28840 u262144
[    0.013887] pcpu-alloc: s200536 r8192 d28840 u262144 alloc=1*2097152
[    0.013888] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.013913] Built 1 zonelists, mobility grouping on.  Total pages: 3960528
[    0.013914] Policy zone: Normal
[    0.013914] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-13-amd64 root=UUID=db4446de-5bec-4ace-8432-f9196b1c7989 ro quiet
[    0.014290] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.014465] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.014499] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.021837] Memory: 2943900K/16093684K available (12295K kernel code, 2545K rwdata, 7568K rodata, 2412K init, 3680K bss, 520844K reserved, 0K cma-reserved)
[    0.021844] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4d0 with crng_init=0
[    0.021904] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.021912] ftrace: allocating 36453 entries in 143 pages
[    0.031660] ftrace: allocated 143 pages with 5 groups
[    0.031737] rcu: Hierarchical RCU implementation.
[    0.031738] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[    0.031739] 	Rude variant of Tasks RCU enabled.
[    0.031739] 	Tracing variant of Tasks RCU enabled.
[    0.031740] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.031740] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.033647] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
[    0.033914] random: crng done (trusting CPU's manufacturer)
[    0.033927] Console: colour dummy device 80x25
[    0.033935] printk: console [tty0] enabled
[    0.033944] ACPI: Core revision 20200925
[    0.034111] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.034126] APIC: Switch to symmetric I/O mode setup
[    0.034680] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
[    0.034681] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
[    0.034681] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
[    0.034682] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
[    0.034944] x2apic enabled
[    0.034948] Switched APIC routing to cluster x2apic.
[    0.035538] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.054133] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f7acf4069d, max_idle_ns: 440795238919 ns
[    0.054136] Calibrating delay loop (skipped), value calculated using timer frequency.. 6587.81 BogoMIPS (lpj=13175624)
[    0.054138] pid_max: default: 32768 minimum: 301
[    0.055452] LSM: Security Framework initializing
[    0.055461] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.055478] AppArmor: AppArmor initialized
[    0.055479] TOMOYO Linux initialized
[    0.055529] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.055560] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.055736] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.055766] LVT offset 1 assigned for vector 0xf9
[    0.055875] LVT offset 2 assigned for vector 0xf4
[    0.055901] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[    0.055901] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.055904] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.055905] Spectre V2 : Mitigation: Retpolines
[    0.055906] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.055906] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.055907] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.055908] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.055908] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.056057] Freeing SMP alternatives memory: 32K
[    0.168414] smpboot: CPU0: AMD Ryzen 5 5600H with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0)
[    0.168527] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.168530] ... version:                0
[    0.168531] ... bit width:              48
[    0.168531] ... generic registers:      6
[    0.168531] ... value mask:             0000ffffffffffff
[    0.168532] ... max period:             00007fffffffffff
[    0.168532] ... fixed-purpose events:   0
[    0.168532] ... event mask:             000000000000003f
[    0.168575] rcu: Hierarchical SRCU implementation.
[    0.168810] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.168929] smp: Bringing up secondary CPUs ...
[    0.169003] x86: Booting SMP configuration:
[    0.169005] .... node  #0, CPUs:        #1
[    0.170135] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.170135]   #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.192166] smp: Brought up 1 node, 12 CPUs
[    0.192166] smpboot: Max logical packages: 2
[    0.192166] smpboot: Total of 12 processors activated (79053.74 BogoMIPS)
[    0.204955] node 0 deferred pages initialised in 16ms
[    0.206344] devtmpfs: initialized
[    0.206344] x86/mm: Memory block size: 128MB
[    0.206734] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20efff] (61440 bytes)
[    0.206734] PM: Registering ACPI NVS region [mem 0xb70ce000-0xb72c1fff] (2048000 bytes)
[    0.206734] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.206734] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.206734] pinctrl core: initialized pinctrl subsystem
[    0.206734] NET: Registered protocol family 16
[    0.206734] audit: initializing netlink subsys (disabled)
[    0.206734] audit: type=2000 audit(1649325645.172:1): state=initialized audit_enabled=0 res=1
[    0.206734] thermal_sys: Registered thermal governor 'fair_share'
[    0.206734] thermal_sys: Registered thermal governor 'bang_bang'
[    0.206734] thermal_sys: Registered thermal governor 'step_wise'
[    0.206734] thermal_sys: Registered thermal governor 'user_space'
[    0.206734] thermal_sys: Registered thermal governor 'power_allocator'
[    0.206734] cpuidle: using governor ladder
[    0.206734] cpuidle: using governor menu
[    0.206734] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.206734] ACPI: bus type PCI registered
[    0.206734] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.206734] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.206734] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.206734] PCI: Using configuration type 1 for base access
[    0.206741] Kprobes globally optimized
[    0.206744] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.206744] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.270764] ACPI: Added _OSI(Module Device)
[    0.270764] ACPI: Added _OSI(Processor Device)
[    0.270764] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.270764] ACPI: Added _OSI(Processor Aggregator Device)
[    0.270764] ACPI: Added _OSI(Linux-Dell-Video)
[    0.270764] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.270764] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.283246] ACPI: 16 ACPI AML tables successfully acquired and loaded
[    0.284072] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.285074] ACPI: EC: EC started
[    0.285074] ACPI: EC: interrupt blocked
[    0.610231] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.610235] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
[    0.610236] ACPI: Interpreter enabled
[    0.610269] ACPI: (supports S0 S3 S4 S5)
[    0.610271] ACPI: Using IOAPIC for interrupt routing
[    0.610572] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.611114] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.613580] ACPI: Power Resource [PG00] (on)
[    0.616416] ACPI: Power Resource [PRWL] (on)
[    0.616429] ACPI: Power Resource [PRWB] (on)
[    0.616857] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.616860] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.616938] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.617011] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.617011] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.617019] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.617192] PCI host bridge to bus 0000:00
[    0.617192] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.617193] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.617194] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.617194] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.617194] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.617195] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.617195] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.617196] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.617196] pci_bus 0000:00: root bus resource [mem 0x440000000-0xffffffffff window]
[    0.617197] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.617207] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000
[    0.617274] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600
[    0.617350] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000
[    0.617405] pci 0000:00:01.1: [1022:1633] type 01 class 0x060400
[    0.617464] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.617526] pci 0000:00:01.2: [1022:1634] type 01 class 0x060400
[    0.617546] pci 0000:00:01.2: enabling Extended Tags
[    0.617575] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.617643] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000
[    0.617698] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400
[    0.617718] pci 0000:00:02.1: enabling Extended Tags
[    0.617746] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[    0.617800] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400
[    0.617847] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.617909] pci 0000:00:02.4: [1022:1634] type 01 class 0x060400
[    0.617928] pci 0000:00:02.4: enabling Extended Tags
[    0.617956] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    0.618021] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000
[    0.618075] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400
[    0.618094] pci 0000:00:08.1: enabling Extended Tags
[    0.618121] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.618209] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.618311] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.618418] pci 0000:00:18.0: [1022:166a] type 00 class 0x060000
[    0.618452] pci 0000:00:18.1: [1022:166b] type 00 class 0x060000
[    0.618487] pci 0000:00:18.2: [1022:166c] type 00 class 0x060000
[    0.618525] pci 0000:00:18.3: [1022:166d] type 00 class 0x060000
[    0.618559] pci 0000:00:18.4: [1022:166e] type 00 class 0x060000
[    0.618593] pci 0000:00:18.5: [1022:166f] type 00 class 0x060000
[    0.618628] pci 0000:00:18.6: [1022:1670] type 00 class 0x060000
[    0.618662] pci 0000:00:18.7: [1022:1671] type 00 class 0x060000
[    0.618756] pci 0000:01:00.0: [10de:25a2] type 00 class 0x030000
[    0.618764] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[    0.618770] pci 0000:01:00.0: reg 0x14: [mem 0xfe00000000-0xfeffffffff 64bit pref]
[    0.618776] pci 0000:01:00.0: reg 0x1c: [mem 0xff00000000-0xff01ffffff 64bit pref]
[    0.618780] pci 0000:01:00.0: reg 0x24: [io  0xf000-0xf07f]
[    0.618784] pci 0000:01:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref]
[    0.618830] pci 0000:01:00.0: PME# supported from D0 D3hot
[    0.618894] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:01.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.618934] pci 0000:01:00.1: [10de:2291] type 00 class 0x040300
[    0.618942] pci 0000:01:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff]
[    0.619035] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.619038] pci 0000:00:01.1:   bridge window [io  0xf000-0xffff]
[    0.619039] pci 0000:00:01.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.619041] pci 0000:00:01.1:   bridge window [mem 0xfe00000000-0xff01ffffff 64bit pref]
[    0.619091] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.619104] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.619120] pci 0000:02:00.0: reg 0x18: [mem 0xfc904000-0xfc904fff 64bit]
[    0.619131] pci 0000:02:00.0: reg 0x20: [mem 0xfc900000-0xfc903fff 64bit]
[    0.619214] pci 0000:02:00.0: supports D1 D2
[    0.619214] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.619325] pci 0000:00:01.2: PCI bridge to [bus 02]
[    0.619327] pci 0000:00:01.2:   bridge window [io  0xe000-0xefff]
[    0.619328] pci 0000:00:01.2:   bridge window [mem 0xfc900000-0xfc9fffff]
[    0.619378] pci 0000:03:00.0: [10ec:8852] type 00 class 0x028000
[    0.619396] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.619418] pci 0000:03:00.0: reg 0x18: [mem 0xfc800000-0xfc8fffff 64bit]
[    0.619531] pci 0000:03:00.0: supports D1 D2
[    0.619531] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.619647] pci 0000:00:02.1: PCI bridge to [bus 03]
[    0.619649] pci 0000:00:02.1:   bridge window [io  0xd000-0xdfff]
[    0.619651] pci 0000:00:02.1:   bridge window [mem 0xfc800000-0xfc8fffff]
[    0.622222] pci 0000:04:00.0: [17a0:9750] type 00 class 0x080501
[    0.622294] pci 0000:04:00.0: reg 0x10: [mem 0xfc700000-0xfc700fff]
[    0.622648] pci 0000:04:00.0: supports D1 D2
[    0.622649] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.626180] pci 0000:00:02.2: PCI bridge to [bus 04]
[    0.626184] pci 0000:00:02.2:   bridge window [mem 0xfc700000-0xfc7fffff]
[    0.626294] pci 0000:05:00.0: [15b7:5006] type 00 class 0x010802
[    0.626312] pci 0000:05:00.0: reg 0x10: [mem 0xfc600000-0xfc603fff 64bit]
[    0.626338] pci 0000:05:00.0: reg 0x20: [mem 0xfc604000-0xfc6040ff 64bit]
[    0.626498] pci 0000:00:02.4: PCI bridge to [bus 05]
[    0.626502] pci 0000:00:02.4:   bridge window [mem 0xfc600000-0xfc6fffff]
[    0.626560] pci 0000:06:00.0: [1002:1638] type 00 class 0x030000
[    0.626572] pci 0000:06:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.626581] pci 0000:06:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.626586] pci 0000:06:00.0: reg 0x20: [io  0xc000-0xc0ff]
[    0.626591] pci 0000:06:00.0: reg 0x24: [mem 0xfc500000-0xfc57ffff]
[    0.626600] pci 0000:06:00.0: enabling Extended Tags
[    0.626612] pci 0000:06:00.0: BAR 0: assigned to efifb
[    0.626659] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.626702] pci 0000:06:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.626737] pci 0000:06:00.1: [1002:1637] type 00 class 0x040300
[    0.626745] pci 0000:06:00.1: reg 0x10: [mem 0xfc5c8000-0xfc5cbfff]
[    0.626769] pci 0000:06:00.1: enabling Extended Tags
[    0.626804] pci 0000:06:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.626855] pci 0000:06:00.2: [1022:15df] type 00 class 0x108000
[    0.626866] pci 0000:06:00.2: reg 0x18: [mem 0xfc400000-0xfc4fffff]
[    0.626874] pci 0000:06:00.2: reg 0x24: [mem 0xfc5cc000-0xfc5cdfff]
[    0.626880] pci 0000:06:00.2: enabling Extended Tags
[    0.626949] pci 0000:06:00.3: [1022:1639] type 00 class 0x0c0330
[    0.626958] pci 0000:06:00.3: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit]
[    0.626981] pci 0000:06:00.3: enabling Extended Tags
[    0.627010] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.627055] pci 0000:06:00.4: [1022:1639] type 00 class 0x0c0330
[    0.627064] pci 0000:06:00.4: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit]
[    0.627085] pci 0000:06:00.4: enabling Extended Tags
[    0.627114] pci 0000:06:00.4: PME# supported from D0 D3hot D3cold
[    0.627157] pci 0000:06:00.5: [1022:15e2] type 00 class 0x048000
[    0.627163] pci 0000:06:00.5: reg 0x10: [mem 0xfc580000-0xfc5bffff]
[    0.627181] pci 0000:06:00.5: enabling Extended Tags
[    0.627208] pci 0000:06:00.5: PME# supported from D0 D3hot D3cold
[    0.627249] pci 0000:06:00.6: [1022:15e3] type 00 class 0x040300
[    0.627256] pci 0000:06:00.6: reg 0x10: [mem 0xfc5c0000-0xfc5c7fff]
[    0.627274] pci 0000:06:00.6: enabling Extended Tags
[    0.627301] pci 0000:06:00.6: PME# supported from D0 D3hot D3cold
[    0.627348] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.627350] pci 0000:00:08.1:   bridge window [io  0xc000-0xcfff]
[    0.627352] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc5fffff]
[    0.627354] pci 0000:00:08.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.627727] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.627756] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.627780] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.627811] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.627838] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.627860] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.627882] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.627904] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.628649] ACPI: EC: interrupt unblocked
[    0.628649] ACPI: EC: event unblocked
[    0.628654] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.628654] ACPI: EC: GPE=0x3
[    0.628655] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete
[    0.628655] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[    0.628677] iommu: Default domain type: Translated 
[    0.628683] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.628683] pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.628683] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.628683] pci 0000:06:00.0: vgaarb: bridge control possible
[    0.628683] pci 0000:06:00.0: vgaarb: setting as boot device
[    0.628683] vgaarb: loaded
[    0.630478] EDAC MC: Ver: 3.0.0
[    0.633717] Registered efivars operations
[    0.633717] NetLabel: Initializing
[    0.633717] NetLabel:  domain hash size = 128
[    0.633717] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.633717] NetLabel:  unlabeled traffic allowed by default
[    0.633717] PCI: Using ACPI for IRQ routing
[    0.638139] PCI: pci_cache_line_size set to 64 bytes
[    0.642186] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.642188] e820: reserve RAM buffer [mem 0x09ef0000-0x0bffffff]
[    0.642188] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.642189] e820: reserve RAM buffer [mem 0xb2cef000-0xb3ffffff]
[    0.642189] e820: reserve RAM buffer [mem 0xb3b6c000-0xb3ffffff]
[    0.642190] e820: reserve RAM buffer [mem 0xb4174000-0xb7ffffff]
[    0.642190] e820: reserve RAM buffer [mem 0xb6efc000-0xb7ffffff]
[    0.642191] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
[    0.642191] e820: reserve RAM buffer [mem 0x41e300000-0x41fffffff]
[    0.642205] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.642207] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.646543] clocksource: Switched to clocksource tsc-early
[    0.650971] VFS: Disk quotas dquot_6.6.0
[    0.650983] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.651039] AppArmor: AppArmor Filesystem Enabled
[    0.651047] pnp: PnP ACPI init
[    0.651096] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.651098] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.651137] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.651150] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.651253] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.651253] system 00:03: [io  0x040b] has been reserved
[    0.651254] system 00:03: [io  0x04d6] has been reserved
[    0.651255] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.651256] system 00:03: [io  0x0c14] has been reserved
[    0.651256] system 00:03: [io  0x0c50-0x0c51] has been reserved
[    0.651257] system 00:03: [io  0x0c52] has been reserved
[    0.651257] system 00:03: [io  0x0c6c] has been reserved
[    0.651258] system 00:03: [io  0x0c6f] has been reserved
[    0.651259] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[    0.651259] system 00:03: [io  0x0800-0x089f] has been reserved
[    0.651260] system 00:03: [io  0x0b00-0x0b0f] has been reserved
[    0.651260] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[    0.651261] system 00:03: [io  0x0900-0x090f] has been reserved
[    0.651262] system 00:03: [io  0x0910-0x091f] has been reserved
[    0.651262] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.651263] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.651264] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.651264] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.651265] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.651266] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.651266] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    0.651268] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.652578] pnp: PnP ACPI: found 4 devices
[    0.657949] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.658000] NET: Registered protocol family 2
[    0.658169] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.659454] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.659547] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.659668] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.659713] TCP: Hash tables configured (established 131072 bind 65536)
[    0.659745] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.659777] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.659819] NET: Registered protocol family 1
[    0.659822] NET: Registered protocol family 44
[    0.659829] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.659830] pci 0000:00:01.1:   bridge window [io  0xf000-0xffff]
[    0.659833] pci 0000:00:01.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.659834] pci 0000:00:01.1:   bridge window [mem 0xfe00000000-0xff01ffffff 64bit pref]
[    0.659836] pci 0000:00:01.2: PCI bridge to [bus 02]
[    0.659837] pci 0000:00:01.2:   bridge window [io  0xe000-0xefff]
[    0.659839] pci 0000:00:01.2:   bridge window [mem 0xfc900000-0xfc9fffff]
[    0.659843] pci 0000:00:02.1: PCI bridge to [bus 03]
[    0.659844] pci 0000:00:02.1:   bridge window [io  0xd000-0xdfff]
[    0.659845] pci 0000:00:02.1:   bridge window [mem 0xfc800000-0xfc8fffff]
[    0.659849] pci 0000:00:02.2: PCI bridge to [bus 04]
[    0.659850] pci 0000:00:02.2:   bridge window [mem 0xfc700000-0xfc7fffff]
[    0.659854] pci 0000:00:02.4: PCI bridge to [bus 05]
[    0.659855] pci 0000:00:02.4:   bridge window [mem 0xfc600000-0xfc6fffff]
[    0.659859] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.659860] pci 0000:00:08.1:   bridge window [io  0xc000-0xcfff]
[    0.659862] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc5fffff]
[    0.659863] pci 0000:00:08.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.659866] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.659866] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.659867] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.659867] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.659868] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.659868] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.659869] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff window]
[    0.659869] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.659870] pci_bus 0000:00: resource 12 [mem 0x440000000-0xffffffffff window]
[    0.659870] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.659871] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfc0fffff]
[    0.659871] pci_bus 0000:01: resource 2 [mem 0xfe00000000-0xff01ffffff 64bit pref]
[    0.659872] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.659872] pci_bus 0000:02: resource 1 [mem 0xfc900000-0xfc9fffff]
[    0.659873] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.659873] pci_bus 0000:03: resource 1 [mem 0xfc800000-0xfc8fffff]
[    0.659873] pci_bus 0000:04: resource 1 [mem 0xfc700000-0xfc7fffff]
[    0.659874] pci_bus 0000:05: resource 1 [mem 0xfc600000-0xfc6fffff]
[    0.659874] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.659875] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc5fffff]
[    0.659875] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.659938] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.663158] pci 0000:06:00.1: D0 power state depends on 0000:06:00.0
[    0.663163] pci 0000:06:00.3: extending delay after power-on from D3hot to 20 msec
[    0.663280] pci 0000:06:00.4: extending delay after power-on from D3hot to 20 msec
[    0.663324] PCI: CLS 64 bytes, default 64
[    0.663347] Trying to unpack rootfs image as initramfs...
[    1.135901] Freeing initrd memory: 65596K
[    1.135911] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    1.135985] pci 0000:00:00.2: can't derive routing for PCI INT A
[    1.135986] pci 0000:00:00.2: PCI INT A: not connected
[    1.136008] pci 0000:00:01.0: Adding to iommu group 0
[    1.136014] pci 0000:00:01.1: Adding to iommu group 1
[    1.136020] pci 0000:00:01.2: Adding to iommu group 2
[    1.136028] pci 0000:00:02.0: Adding to iommu group 3
[    1.136034] pci 0000:00:02.1: Adding to iommu group 4
[    1.136039] pci 0000:00:02.2: Adding to iommu group 5
[    1.136045] pci 0000:00:02.4: Adding to iommu group 6
[    1.136052] pci 0000:00:08.0: Adding to iommu group 7
[    1.136057] pci 0000:00:08.1: Adding to iommu group 8
[    1.136064] pci 0000:00:14.0: Adding to iommu group 9
[    1.136068] pci 0000:00:14.3: Adding to iommu group 9
[    1.136084] pci 0000:00:18.0: Adding to iommu group 10
[    1.136088] pci 0000:00:18.1: Adding to iommu group 10
[    1.136092] pci 0000:00:18.2: Adding to iommu group 10
[    1.136097] pci 0000:00:18.3: Adding to iommu group 10
[    1.136101] pci 0000:00:18.4: Adding to iommu group 10
[    1.136105] pci 0000:00:18.5: Adding to iommu group 10
[    1.136110] pci 0000:00:18.6: Adding to iommu group 10
[    1.136114] pci 0000:00:18.7: Adding to iommu group 10
[    1.136122] pci 0000:01:00.0: Adding to iommu group 11
[    1.136128] pci 0000:01:00.1: Adding to iommu group 11
[    1.136135] pci 0000:02:00.0: Adding to iommu group 12
[    1.136140] pci 0000:03:00.0: Adding to iommu group 13
[    1.136147] pci 0000:04:00.0: Adding to iommu group 14
[    1.136153] pci 0000:05:00.0: Adding to iommu group 15
[    1.136168] pci 0000:06:00.0: Adding to iommu group 16
[    1.136174] pci 0000:06:00.1: Adding to iommu group 17
[    1.136181] pci 0000:06:00.2: Adding to iommu group 18
[    1.136187] pci 0000:06:00.3: Adding to iommu group 19
[    1.136193] pci 0000:06:00.4: Adding to iommu group 20
[    1.136199] pci 0000:06:00.5: Adding to iommu group 21
[    1.136206] pci 0000:06:00.6: Adding to iommu group 22
[    1.138080] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    1.138081] AMD-Vi: Extended features (0x206d73ef22254ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
[    1.138084] AMD-Vi: Interrupt remapping enabled
[    1.138084] AMD-Vi: Virtual APIC enabled
[    1.138085] AMD-Vi: X2APIC enabled
[    1.178637] AMD-Vi: Lazy IO/TLB flushing enabled
[    1.179520] amd_uncore: 4  amd_df counters detected
[    1.179524] amd_uncore: 6  amd_l3 counters detected
[    1.179928] LVT offset 0 assigned for vector 0x400
[    1.180086] perf: AMD IBS detected (0x000003ff)
[    1.180094] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    1.180395] Initialise system trusted keyrings
[    1.180402] Key type blacklist registered
[    1.180438] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    1.180873] zbud: loaded
[    1.181003] integrity: Platform Keyring initialized
[    1.181004] Key type asymmetric registered
[    1.181005] Asymmetric key parser 'x509' registered
[    1.181012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.181050] io scheduler mq-deadline registered
[    1.182063] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[    1.182080] pcieport 0000:00:01.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+

 
jandelalune
Membre
Membre
Messages : 144
Enregistré le : 29 janv. 2018, 19:01
Status : Hors ligne

Suite & Fin

Code : Tout sélectionner

[    1.182213] pcieport 0000:00:01.2: PME: Signaling with IRQ 27
[    1.182286] pcieport 0000:00:02.1: PME: Signaling with IRQ 28
[    1.182356] pcieport 0000:00:02.2: PME: Signaling with IRQ 29
[    1.182432] pcieport 0000:00:02.4: PME: Signaling with IRQ 30
[    1.182506] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[    1.182559] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.182567] efifb: probing for efifb
[    1.182590] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
[    1.182591] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    1.182591] efifb: scrolling: redraw
[    1.182592] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.182640] Console: switching to colour frame buffer device 128x48
[    1.183450] fb0: EFI VGA frame buffer device
[    1.183481] Monitor-Mwait will be used to enter C-1 state
[    1.183485] ACPI: \_SB_.PLTF.P000: Found 3 idle states
[    1.183540] ACPI: \_SB_.PLTF.P001: Found 3 idle states
[    1.183598] ACPI: \_SB_.PLTF.P002: Found 3 idle states
[    1.184341] ACPI: \_SB_.PLTF.P003: Found 3 idle states
[    1.184441] ACPI: \_SB_.PLTF.P004: Found 3 idle states
[    1.184598] ACPI: \_SB_.PLTF.P005: Found 3 idle states
[    1.184737] ACPI: \_SB_.PLTF.P006: Found 3 idle states
[    1.184871] ACPI: \_SB_.PLTF.P007: Found 3 idle states
[    1.184966] ACPI: \_SB_.PLTF.P008: Found 3 idle states
[    1.185084] ACPI: \_SB_.PLTF.P009: Found 3 idle states
[    1.185159] ACPI: \_SB_.PLTF.P00A: Found 3 idle states
[    1.185259] ACPI: \_SB_.PLTF.P00B: Found 3 idle states
[    1.186440] thermal LNXTHERM:00: registered as thermal_zone0
[    1.186441] ACPI: Thermal Zone [THRM] (59 C)
[    1.186554] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.186842] Linux agpgart interface v0.103
[    1.186928] AMD-Vi: AMD IOMMUv2 loaded and initialized
[    1.187517] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.187518] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.189233] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.189324] mousedev: PS/2 mouse device common for all mice
[    1.189367] rtc_cmos 00:01: RTC can wake from S4
[    1.189549] rtc_cmos 00:01: registered as rtc0
[    1.189606] rtc_cmos 00:01: setting system clock to 2022-04-07T10:00:46 UTC (1649325646)
[    1.189623] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.189924] ledtrig-cpu: registered to indicate activity on CPUs
[    1.190209] NET: Registered protocol family 10
[    1.195362] Segment Routing with IPv6
[    1.195378] mip6: Mobile IPv6
[    1.195380] NET: Registered protocol family 17
[    1.195435] mpls_gso: MPLS GSO support
[    1.196269] microcode: CPU0: patch_level=0x0a50000c
[    1.196276] microcode: CPU1: patch_level=0x0a50000c
[    1.196284] microcode: CPU2: patch_level=0x0a50000c
[    1.196298] microcode: CPU3: patch_level=0x0a50000c
[    1.196319] microcode: CPU4: patch_level=0x0a50000c
[    1.196334] microcode: CPU5: patch_level=0x0a50000c
[    1.196354] microcode: CPU6: patch_level=0x0a50000c
[    1.196368] microcode: CPU7: patch_level=0x0a50000c
[    1.196375] microcode: CPU8: patch_level=0x0a50000c
[    1.196391] microcode: CPU9: patch_level=0x0a50000c
[    1.196398] microcode: CPU10: patch_level=0x0a50000c
[    1.196404] microcode: CPU11: patch_level=0x0a50000c
[    1.196407] microcode: Microcode Update Driver: v2.2.
[    1.196589] resctrl: L3 allocation detected
[    1.196590] resctrl: L3DATA allocation detected
[    1.196591] resctrl: L3CODE allocation detected
[    1.196591] resctrl: MB allocation detected
[    1.196591] resctrl: L3 monitoring detected
[    1.196594] IPI shorthand broadcast: enabled
[    1.196598] sched_clock: Marking stable (1196280695, 300078)->(1199667456, -3086683)
[    1.196718] registered taskstats version 1
[    1.196720] Loading compiled-in X.509 certificates
[    1.211579] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.211595] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    1.211634] zswap: loaded using pool lzo/zbud
[    1.212041] Key type ._fscrypt registered
[    1.212042] Key type .fscrypt registered
[    1.212043] Key type fscrypt-provisioning registered
[    1.212071] AppArmor: AppArmor sha1 policy hashing enabled
[    1.212181] integrity: Loading X.509 certificate: UEFI:db
[    1.212206] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7'
[    1.212207] integrity: Loading X.509 certificate: UEFI:db
[    1.212222] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.212222] integrity: Loading X.509 certificate: UEFI:db
[    1.212236] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.213407] Freeing unused kernel image (initmem) memory: 2412K
[    1.262650] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.266440] Write protecting the kernel read-only data: 22528k
[    1.267286] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    1.267730] Freeing unused kernel image (rodata/data gap) memory: 624K
[    1.291624] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.291629] Run /init as init process
[    1.291629]   with arguments:
[    1.291630]     /init
[    1.291631]   with environment:
[    1.291631]     HOME=/
[    1.291631]     TERM=linux
[    1.291631]     BOOT_IMAGE=/boot/vmlinuz-5.10.0-13-amd64
[    1.327513] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.327536] ACPI: Power Button [PWRB]
[    1.327580] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.327597] ACPI: Lid Switch [LID]
[    1.327640] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.329649] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.329864] acpi device:04: registered as cooling_device12
[    1.329886] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4
[    1.329913] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    1.329927] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:01/input/input5
[    1.331264] hid: raw HID events driver (C) Jiri Kosina
[    1.332901] i2c_hid i2c-SYNA32B9:00: supply vdd not found, using dummy regulator
[    1.332925] i2c_hid i2c-SYNA32B9:00: supply vddl not found, using dummy regulator
[    1.332934] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.334025] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xff00, revision 15
[    1.334027] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    1.334080] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xff20
[    1.339647] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.342163] ACPI: Power Button [PWRF]
[    1.345767] ACPI: bus type USB registered
[    1.345778] usbcore: registered new interface driver usbfs
[    1.345781] usbcore: registered new interface driver hub
[    1.345788] usbcore: registered new device driver usb
[    1.489388] input: SYNA32B9:00 06CB:CE7D Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32B9:00/0018:06CB:CE7D.0001/input/input6
[    1.489434] input: SYNA32B9:00 06CB:CE7D Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32B9:00/0018:06CB:CE7D.0001/input/input7
[    1.489469] hid-generic 0018:06CB:CE7D.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA32B9:00 06CB:CE7D] on i2c-SYNA32B9:00
[    1.490661] sdhci: Secure Digital Host Controller Interface driver
[    1.490662] sdhci: Copyright(c) Pierre Ossman
[    1.493257] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.493264] r8169 0000:02:00.0: enabling device (0000 -> 0003)
[    1.494325] sdhci-pci 0000:04:00.0: SDHCI controller found [17a0:9750] (rev 1)
[    1.497687] sdhci-pci 0000:04:00.0: enabling device (0000 -> 0002)
[    1.517746] mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA
[    1.521108] r8169 0000:02:00.0 eth0: RTL8168h/8111h, e0:70:ea:c9:0b:b3, XID 541, IRQ 36
[    1.521109] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.522124] r8169 0000:02:00.0 eno1: renamed from eth0
[    1.522216] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    1.522221] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 1
[    1.522310] xhci_hcd 0000:06:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410
[    1.522596] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.522597] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.522599] usb usb1: Product: xHCI Host Controller
[    1.522599] usb usb1: Manufacturer: Linux 5.10.0-13-amd64 xhci-hcd
[    1.522600] usb usb1: SerialNumber: 0000:06:00.3
[    1.522783] hub 1-0:1.0: USB hub found
[    1.522790] hub 1-0:1.0: 4 ports detected
[    1.522961] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    1.522963] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 2
[    1.522966] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    1.522976] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.522990] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.522991] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.522992] usb usb2: Product: xHCI Host Controller
[    1.522993] usb usb2: Manufacturer: Linux 5.10.0-13-amd64 xhci-hcd
[    1.522993] usb usb2: SerialNumber: 0000:06:00.3
[    1.523047] hub 2-0:1.0: USB hub found
[    1.523052] hub 2-0:1.0: 2 ports detected
[    1.523254] xhci_hcd 0000:06:00.4: xHCI Host Controller
[    1.523257] xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 3
[    1.523331] nvme nvme0: pci function 0000:05:00.0
[    1.523384] xhci_hcd 0000:06:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410
[    1.523632] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.523633] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.523633] usb usb3: Product: xHCI Host Controller
[    1.523634] usb usb3: Manufacturer: Linux 5.10.0-13-amd64 xhci-hcd
[    1.523634] usb usb3: SerialNumber: 0000:06:00.4
[    1.523750] hub 3-0:1.0: USB hub found
[    1.523756] hub 3-0:1.0: 4 ports detected
[    1.523901] xhci_hcd 0000:06:00.4: xHCI Host Controller
[    1.523904] xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 4
[    1.523906] xhci_hcd 0000:06:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    1.523914] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.523926] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.523927] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.523927] usb usb4: Product: xHCI Host Controller
[    1.523928] usb usb4: Manufacturer: Linux 5.10.0-13-amd64 xhci-hcd
[    1.523928] usb usb4: SerialNumber: 0000:06:00.4
[    1.524036] hub 4-0:1.0: USB hub found
[    1.524041] hub 4-0:1.0: 2 ports detected
[    1.532563] nvme nvme0: 16/0/0 default/read/poll queues
[    1.535400]  nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8
[    1.700697] [drm] amdgpu kernel modesetting enabled.
[    1.700714] vga_switcheroo: detected switching method \_SB_.PCI0.GP17.VGA_.ATPX handle
[    1.700942] ATPX version 1, functions 0x00000001
[    1.700963] ATPX Hybrid Graphics
[    1.701007] Virtual CRAT table created for CPU
[    1.701014] amdgpu: Topology: Add CPU node
[    1.701059] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.701060] fb0: switching to amdgpudrmfb from EFI VGA
[    1.701108] Console: switching to colour dummy device 80x25
[    1.701131] amdgpu 0000:06:00.0: vgaarb: deactivate vga console
[    1.701163] amdgpu 0000:06:00.0: enabling device (0006 -> 0007)
[    1.701195] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1638 0x103C:0x88EC 0xC6).
[    1.701197] amdgpu 0000:06:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[    1.701205] [drm] register mmio base: 0xFC500000
[    1.701206] [drm] register mmio size: 524288
[    1.701208] [drm] PCIE atomic ops is not supported
[    1.702300] [drm] add ip block number 0 <soc15_common>
[    1.702302] [drm] add ip block number 1 <gmc_v9_0>
[    1.702302] [drm] add ip block number 2 <vega10_ih>
[    1.702303] [drm] add ip block number 3 <psp>
[    1.702303] [drm] add ip block number 4 <smu>
[    1.702304] [drm] add ip block number 5 <gfx_v9_0>
[    1.702304] [drm] add ip block number 6 <sdma_v4_0>
[    1.702305] [drm] add ip block number 7 <dm>
[    1.702305] [drm] add ip block number 8 <vcn_v2_0>
[    1.702306] [drm] add ip block number 9 <jpeg_v2_0>
[    1.702317] amdgpu 0000:06:00.0: amdgpu: Fetched VBIOS from VFCT
[    1.702318] amdgpu: ATOM BIOS: 113-CEZANNE-018
[    1.702352] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_sdma.bin
[    1.702354] [drm] VCN decode is enabled in VM mode
[    1.702355] [drm] VCN encode is enabled in VM mode
[    1.702355] [drm] JPEG decode is enabled in VM mode
[    1.702379] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    1.702384] amdgpu 0000:06:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[    1.702384] amdgpu 0000:06:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    1.702385] amdgpu 0000:06:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[    1.702389] [drm] Detected VRAM RAM=512M, BAR=512M
[    1.702389] [drm] RAM width 128bits DDR4
[    1.702456] [TTM] Zone  kernel: Available graphics memory: 7887618 KiB
[    1.702456] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    1.702457] [TTM] Initializing pool allocator
[    1.702459] [TTM] Initializing DMA pool allocator
[    1.702486] [drm] amdgpu: 512M of VRAM memory ready
[    1.702487] [drm] amdgpu: 3072M of GTT memory ready.
[    1.702488] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.702612] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[    1.702741] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_asd.bin
[    1.702753] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_ta.bin
[    1.702773] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_pfp.bin
[    1.702785] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_me.bin
[    1.702795] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_ce.bin
[    1.702805] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_rlc.bin
[    1.702842] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_mec.bin
[    1.702877] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_mec2.bin
[    1.703517] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_dmcub.bin
[    1.703520] [drm] Loading DMUB firmware via PSP: version=0x0101000A
[    1.703573] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_vcn.bin
[    1.703574] [drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 17
[    1.703577] amdgpu 0000:06:00.0: amdgpu: Will use PSP to load VCN firmware
[    1.778456] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.778465] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.937377] usb 1-3: New USB device found, idVendor=30c9, idProduct=000e, bcdDevice= 0.02
[    1.937379] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.937380] usb 1-3: Product: HP Wide Vision HD Camera
[    1.937380] usb 1-3: Manufacturer: DJKANA1BIFBPNG
[    1.942327] usb 3-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21
[    1.942329] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.942330] usb 3-1: Product: 4-Port USB 2.0 Hub
[    1.942330] usb 3-1: Manufacturer: Generic
[    2.005022] hub 3-1:1.0: USB hub found
[    2.006204] hub 3-1:1.0: 4 ports detected
[    2.068459] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    2.082461] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    2.101268] usb 4-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21
[    2.101270] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.101271] usb 4-1: Product: 4-Port USB 3.0 Hub
[    2.101272] usb 4-1: Manufacturer: Generic
[    2.135394] hub 4-1:1.0: USB hub found
[    2.136675] hub 4-1:1.0: 4 ports detected
[    2.206626] tsc: Refined TSC clocksource calibration: 3293.812 MHz
[    2.206633] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f7a76a4ebd, max_idle_ns: 440795230158 ns
[    2.388495] clocksource: Switched to clocksource tsc
[    2.408524] [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
[    2.426017] usb 1-4: New USB device found, idVendor=0bda, idProduct=2852, bcdDevice= 0.00
[    2.426019] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.426021] usb 1-4: Product: Bluetooth Radio
[    2.426022] usb 1-4: Manufacturer: Realtek
[    2.426022] usb 1-4: SerialNumber: 00e04c000001
[    2.474188] usb 3-1.4: new low-speed USB device number 3 using xhci_hcd
[    2.591105] usb 3-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[    2.591108] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.591110] usb 3-1.4: Product: USB Optical Mouse
[    2.591110] usb 3-1.4: Manufacturer: PixArt
[    2.614187] amdgpu 0000:06:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    2.638197] amdgpu 0000:06:00.0: amdgpu: RAP: optional rap ta ucode is not available
[    2.639536] amdgpu 0000:06:00.0: amdgpu: SMU is initialized successfully!
[    2.640821] [drm] kiq ring mec 2 pipe 1 q 0
[    2.641655] [drm] Display Core initialized with v3.2.104!
[    2.642095] [drm] DMUB hardware initialized: version=0x0101000A
[    2.651153] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1.4/3-1.4:1.0/0003:093A:2510.0002/input/input9
[    2.651281] hid-generic 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:06:00.4-1.4/input0
[    2.651307] usbcore: registered new interface driver usbhid
[    2.651308] usbhid: USB HID core driver
[    2.807963] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[    2.807983] [drm] JPEG decode initialized successfully.
[    2.809223] kfd kfd: Allocated 3969056 bytes on gart
[    2.809640] Virtual CRAT table created for GPU
[    2.809854] amdgpu: Topology: Add dGPU node [0x1638:0x1002]
[    2.809857] kfd kfd: added device 1002:1638
[    2.809859] amdgpu 0000:06:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 7
[    2.810280] [drm] fb mappable at 0x420CCE000
[    2.810281] [drm] vram apper at 0x420000000
[    2.810282] [drm] size 8294400
[    2.810282] [drm] fb depth is 24
[    2.810282] [drm]    pitch is 7680
[    2.810350] fbcon: amdgpudrmfb (fb0) is primary device
[    2.847874] Console: switching to colour frame buffer device 240x67
[    2.866061] amdgpu 0000:06:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[    2.874281] amdgpu 0000:06:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[    2.874284] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    2.874286] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    2.874287] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    2.874288] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    2.874289] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    2.874290] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    2.874291] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    2.874292] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    2.874293] amdgpu 0000:06:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    2.874294] amdgpu 0000:06:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[    2.874295] amdgpu 0000:06:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[    2.874296] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[    2.874297] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[    2.874298] amdgpu 0000:06:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[    2.876814] [drm] Initialized amdgpu 3.40.0 20150101 for 0000:06:00.0 on minor 0
[    2.934284] PM: Image not found (code -22)
[    2.993056] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: (null)
[    3.023123] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    3.056754] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    3.069928] systemd[1]: Inserted module 'autofs4'
[    3.085982] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    3.102883] systemd[1]: Detected architecture x86-64.
[    3.103337] systemd[1]: Set hostname to <VICTUSG>.
[    3.172646] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    3.186692] systemd[1]: Queued start job for default target Graphical Interface.
[    3.187657] systemd[1]: Created slice system-getty.slice.
[    3.187815] systemd[1]: Created slice system-modprobe.slice.
[    3.187979] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.188067] systemd[1]: Created slice User and Session Slice.
[    3.188106] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.188202] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.188247] systemd[1]: Reached target User and Group Name Lookups.
[    3.188261] systemd[1]: Reached target Slices.
[    3.190400] systemd[1]: Listening on RPCbind Server Activation Socket.
[    3.190520] systemd[1]: Listening on Syslog Socket.
[    3.190578] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.190612] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.190700] systemd[1]: Listening on Journal Audit Socket.
[    3.190745] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.190809] systemd[1]: Listening on Journal Socket.
[    3.191001] systemd[1]: Listening on udev Control Socket.
[    3.191045] systemd[1]: Listening on udev Kernel Socket.
[    3.191458] systemd[1]: Mounting Huge Pages File System...
[    3.191980] systemd[1]: Mounting POSIX Message Queue File System...
[    3.192306] systemd[1]: Mounting NFSD configuration filesystem...
[    3.192673] systemd[1]: Mounting RPC Pipe File System...
[    3.193194] systemd[1]: Mounting Kernel Debug File System...
[    3.193621] systemd[1]: Mounting Kernel Trace File System...
[    3.193676] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[    3.194120] systemd[1]: Starting Set the console keyboard layout...
[    3.194778] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    3.195258] systemd[1]: Starting Load Kernel Module configfs...
[    3.196067] systemd[1]: Starting Load Kernel Module drm...
[    3.196821] systemd[1]: Starting Load Kernel Module fuse...
[    3.197420] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    3.197441] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    3.198336] systemd[1]: Starting Journal Service...
[    3.199733] systemd[1]: Starting Load Kernel Modules...
[    3.200297] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.200787] systemd[1]: Starting Coldplug All udev Devices...
[    3.201914] systemd[1]: Mounted Huge Pages File System.
[    3.202009] systemd[1]: Mounted POSIX Message Queue File System.
[    3.202082] systemd[1]: Mounted Kernel Debug File System.
[    3.202160] systemd[1]: Mounted Kernel Trace File System.
[    3.202375] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    3.202590] systemd[1]: modprobe@configfs.service: Succeeded.
[    3.202734] systemd[1]: Finished Load Kernel Module configfs.
[    3.202900] systemd[1]: modprobe@drm.service: Succeeded.
[    3.203034] systemd[1]: Finished Load Kernel Module drm.
[    3.203744] systemd[1]: Mounting Kernel Configuration File System...
[    3.204283] EXT4-fs (nvme0n1p6): re-mounted. Opts: errors=remount-ro
[    3.204379] fuse: init (API version 7.32)
[    3.205086] systemd[1]: modprobe@fuse.service: Succeeded.
[    3.205259] systemd[1]: Finished Load Kernel Module fuse.
[    3.205788] systemd[1]: Finished Remount Root and Kernel File Systems.
[    3.205898] systemd[1]: Mounted Kernel Configuration File System.
[    3.206725] systemd[1]: Mounting FUSE Control File System...
[    3.207066] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    3.207166] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    3.207795] systemd[1]: Starting Load/Save Random Seed...
[    3.208336] systemd[1]: Starting Create System Users...
[    3.209074] systemd[1]: Mounted FUSE Control File System.
[    3.209523] lp: driver loaded but no devices found
[    3.211596] ppdev: user-space parallel port driver
[    3.213887] systemd[1]: Finished Load/Save Random Seed.
[    3.213973] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    3.216774] systemd[1]: Finished Create System Users.
[    3.217453] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.221253] RPC: Registered named UNIX socket transport module.
[    3.221254] RPC: Registered udp transport module.
[    3.221255] RPC: Registered tcp transport module.
[    3.221255] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.221951] systemd[1]: Mounted RPC Pipe File System.
[    3.222448] systemd[1]: Starting pNFS block layout mapping daemon...
[    3.225367] systemd[1]: Finished Create Static Device Nodes in /dev.
[    3.226374] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    3.227035] systemd[1]: Started pNFS block layout mapping daemon.
[    3.240182] systemd[1]: Finished Set the console keyboard layout.
[    3.240261] systemd[1]: Reached target Local File Systems (Pre).
[    3.253159] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.253936] systemd[1]: Mounted NFSD configuration filesystem.
[    3.256855] systemd[1]: Finished Coldplug All udev Devices.
[    3.257759] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[    3.258493] nvidia: loading out-of-tree module taints kernel.
[    3.258503] nvidia: module license 'NVIDIA' taints kernel.
[    3.258504] Disabling lock debugging due to kernel taint
[    3.260272] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[    3.264930] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    3.265062] systemd[1]: Started Journal Service.
[    3.269062] systemd-journald[332]: Received client request to flush runtime journal.
[    3.274863] nvidia-nvlink: Nvlink Core is being initialized, major device number 244

[    3.275262] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[    3.275367] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[    3.308139] input: HP Wireless hotkeys as /devices/virtual/input/input10
[    3.320355] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  460.91.03  Fri Jul  2 06:04:10 UTC 2021
[    3.344185] ccp 0000:06:00.2: enabling device (0000 -> 0002)
[    3.344415] ccp 0000:06:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[    3.346275] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    3.346395] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[    3.346400] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    3.353333] snd_rn_pci_acp3x 0000:06:00.5: enabling device (0000 -> 0002)
[    3.354561] ccp 0000:06:00.2: tee enabled
[    3.354565] ccp 0000:06:00.2: psp enabled
[    3.360878] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  460.91.03  Fri Jul  2 05:43:38 UTC 2021
[    3.367810] pstore: Using crash dump compression: deflate
[    3.367822] pstore: Registered efi as persistent store backend
[    3.368214] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    3.369184] ACPI: AC Adapter [ACAD] (off-line)
[    3.372468] mc: Linux media interface: v0.10
[    3.373719] input: HP WMI hotkeys as /devices/virtual/input/input12
[    3.383983] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    3.383984] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.405591] EXT4-fs (nvme0n1p8): mounted filesystem with ordered data mode. Opts: (null)
[    3.406477] Adding 1000444k swap on /dev/nvme0n1p7.  Priority:-2 extents:1 across:1000444k SSFS
[    3.410601] videodev: Linux video capture interface: v2.00
[    3.411241] cryptd: max_cpu_qlen set to 1000
[    3.411457] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    3.411460] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[    3.421068] AVX2 version of gcm_enc/dec engaged.
[    3.421069] AES CTR mode by8 optimization enabled
[    3.431144] uvcvideo: Found UVC 1.00 device HP Wide Vision HD Camera (30c9:000e)
[    3.435649] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    3.435742] snd_hda_intel 0000:01:00.1: Disabling MSI
[    3.435749] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    3.435809] snd_hda_intel 0000:06:00.1: enabling device (0000 -> 0002)
[    3.435851] snd_hda_intel 0000:06:00.1: Handle vga_switcheroo audio client
[    3.435882] snd_hda_intel 0000:06:00.6: enabling device (0000 -> 0002)
[    3.443449] snd_hda_intel 0000:06:00.1: bound 0000:06:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    3.452015] audit: type=1400 audit(1649318448.758:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=525 comm="apparmor_parser"
[    3.453222] audit: type=1400 audit(1649318448.758:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=520 comm="apparmor_parser"
[    3.453225] audit: type=1400 audit(1649318448.758:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=520 comm="apparmor_parser"
[    3.453227] audit: type=1400 audit(1649318448.758:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=520 comm="apparmor_parser"
[    3.454304] audit: type=1400 audit(1649318448.762:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=521 comm="apparmor_parser"
[    3.454457] audit: type=1400 audit(1649318448.762:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=528 comm="apparmor_parser"
[    3.454460] audit: type=1400 audit(1649318448.762:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=528 comm="apparmor_parser"
[    3.456488] audit: type=1400 audit(1649318448.762:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=519 comm="apparmor_parser"
[    3.460022] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC245: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.460024] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.460025] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.460025] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
[    3.460026] snd_hda_codec_realtek hdaudioC2D0:    inputs:
[    3.460027] snd_hda_codec_realtek hdaudioC2D0:      Mic=0x19
[    3.460146] input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb1/1-3/1-3:1.0/input/input14
[    3.465305] audit: type=1400 audit(1649318448.770:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=522 comm="apparmor_parser"
[    3.554872] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input15
[    3.555440] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:06:00.1/sound/card1/input13
[    3.586528] usbcore: registered new interface driver uvcvideo
[    3.586530] USB Video Class driver (1.1.1)
[    3.586587] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input16
[    3.586647] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input17
[    3.586727] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input18
[    3.594634] input: SYNA32B9:00 06CB:CE7D Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32B9:00/0018:06CB:CE7D.0001/input/input21
[    3.594749] input: SYNA32B9:00 06CB:CE7D Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32B9:00/0018:06CB:CE7D.0001/input/input22
[    3.594914] hid-multitouch 0018:06CB:CE7D.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA32B9:00 06CB:CE7D] on i2c-SYNA32B9:00
[    3.595348] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:06:00.6/sound/card2/input19
[    3.595388] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:06:00.6/sound/card2/input20
[    3.598270] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    3.654018] kvm: Nested Virtualization enabled
[    3.654027] SVM: kvm: Nested Paging enabled
[    3.654027] SVM: Virtual VMLOAD VMSAVE supported
[    3.654028] SVM: Virtual GIF supported
[    3.656286] MCE: In-kernel MCE decoding enabled.
[    3.732535] Bluetooth: Core ver 2.22
[    3.732555] NET: Registered protocol family 31
[    3.732556] Bluetooth: HCI device and connection manager initialized
[    3.732559] Bluetooth: HCI socket layer initialized
[    3.732562] Bluetooth: L2CAP socket layer initialized
[    3.732569] Bluetooth: SCO socket layer initialized
[    3.740948] usbcore: registered new interface driver btusb
[    3.742637] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000a lmp_ver=0b lmp_subver=8852
[    3.742639] Bluetooth: hci0: RTL: unknown IC info, lmp subver 8852, hci rev 000a, hci ver 000b
[    3.742640] Bluetooth: hci0: RTL: assuming no firmware upload needed
[    3.749452] ACPI Warning: \_SB.PCI0.GPP0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200925/nsarguments-61)
[    4.063515] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.063517] Bluetooth: BNEP filters: protocol multicast
[    4.063521] Bluetooth: BNEP socket layer initialized
[    4.066776] NET: Registered protocol family 38
[    4.100424] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
[    4.126594] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-200:00, irq=IGNORE)
[    4.471563] r8169 0000:02:00.0 eno1: Link is Down
[    4.843499] NFSD: Using UMH upcall client tracking operations.
[    4.843504] NFSD: starting 90-second grace period (net f0000098)
[    5.359194] Bluetooth: RFCOMM TTY layer initialized
[    5.359204] Bluetooth: RFCOMM socket layer initialized
[    5.359210] Bluetooth: RFCOMM ver 1.11
[    6.851681] rfkill: input handler disabled
[    7.543177] r8169 0000:02:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[    7.543191] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   18.019913] rfkill: input handler enabled
[   20.538976] rfkill: input handler disabled
[ 3700.916050] kauditd_printk_skb: 13 callbacks suppressed
[ 3700.916052] audit: type=1400 audit(1649322165.537:24): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/libdrm/amdgpu.ids" pid=3575 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3704.856548] audit: type=1400 audit(1649322169.478:25): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/gerard/.mozilla/firefox/xsk8b4c8.default/cert9.db" pid=3574 comm="soffice.bin" requested_mask="wc" denied_mask="wc" fsuid=1000 ouid=1000
[ 3704.857506] audit: type=1400 audit(1649322169.482:26): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/gerard/.mozilla/firefox/xsk8b4c8.default/cert9.db" pid=3574 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000
[ 3704.858067] audit: type=1400 audit(1649322169.482:27): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/gerard/.mozilla/firefox/xsk8b4c8.default/key4.db" pid=3574 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[ 3704.858437] audit: type=1400 audit(1649322169.482:28): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/gerard/.mozilla/firefox/xsk8b4c8.default/key4.db" pid=3574 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000
root@VICTUSG:~# 
Merci d'avance à tous et mes excuses pour ces initiatives intempestives
Cordialement & à +
PascalHambourg
Contributeur
Contributeur
Messages : 638
Enregistré le : 05 août 2016, 20:25
Status : Hors ligne

Grâce aux balises "code" cela ne prend pas trop de place à l'affichage. Mais il n'y a rien d'utile puisque je répète qu'aucun pilote présent n'est identifié pour gérer ce contrôleur wifi.
jandelalune
Membre
Membre
Messages : 144
Enregistré le : 29 janv. 2018, 19:01
Status : Hors ligne

PascalHambourg a écrit
Grâce aux balises "code" cela ne prend pas trop de place à l'affichage. Mais il n'y a rien d'utile puisque je répète qu'aucun pilote présent n'est identifié pour gérer ce contrôleur wifi.
Bonjour PascalHambourg et merci pour la répétition : j'ai eu peur de comprendre , peut être !!

Car si je comprends bien le problème est insoluble ??? et au mieux il faudra que je me débrouille avec W11 en roue de secours????

Pour les balises code je n'ai pas eu le bon réflexe

Cordialement
PascalHambourg
Contributeur
Contributeur
Messages : 638
Enregistré le : 05 août 2016, 20:25
Status : Hors ligne

jandelalune a écrit : 07 avr. 2022, 16:26 Car si je comprends bien le problème est insoluble ?
Non, je n'ai rien dit de tel. Comme je l'ai écrit, il peut y avoir deux solutions :
- Un noyau plus récent qui inclut un pilote pour ce contrôleur. Le noyau 5.16 récemment entré dans bullseye-backports a un module rtw89_pci qui reconnaît l'identifiant PCI de ce contrôleur.
- Un pilote externe à compiler avec le noyau 5.10 actuel.
Avatar du membre
dezix
Modérateur
Modérateur
Messages : 1975
Enregistré le : 04 juin 2016, 14:50
Status : Hors ligne

PascalHambourg a écrit : 07 avr. 2022, 20:13 Le noyau 5.16 récemment entré dans bullseye-backports a un module rtw89_pci qui reconnaît l'identifiant PCI de ce contrôleur.

Comment as-tu déterminé que rtw89 prend en charge ce matériel ?
Debian stable - XFCE
jandelalune
Membre
Membre
Messages : 144
Enregistré le : 29 janv. 2018, 19:01
Status : Hors ligne

PascalHambourg a écrit :
Un noyau plus récent qui inclut un pilote pour ce contrôleur. Le noyau 5.16 récemment entré dans bullseye-backports a un module rtw89_pci qui reconnaît l'identifiant PCI de ce contrôleur.
Bonjour à tous

@PascalHambourg

Merci pour tes réponses
J'ai voulu essayer celle qui concerne l'utilisation du noyau récent. En conséquence j'ai :
1 / modifié ma sourcelists

Code : Tout sélectionner

 root@VICTUSG:~# apt edit-sources

Select an editor.  To change later, run 'select-editor'.
  1. /bin/nano        <---- easiest
2. /usr/bin/vim.tiny

Choose 1-2 [1]: 1

deb http://deb.debian.org/debian bullseye main contrib non-free
deb-src http://deb.debian.org/debian bullseye main contrib non-free

deb http://deb.debian.org/debian-security/ bullseye-security main contrib non-f>
deb-src http://deb.debian.org/debian-security/ bullseye-security main contrib n>

deb http://deb.debian.org/debian bullseye-updates main contrib non-free
deb-src http://deb.debian.org/debian bullseye-updates main contrib non-free

deb http://deb.debian.org/debian bullseye-backports main contrib non-free  
n'est-il pas utile de prévoir une ligne deb-src ???

J'ai continué par une mise à jour :

Code : Tout sélectionner

 root@VICTUSG:~# apt update
Atteint :1 http://deb.debian.org/debian bullseye InRelease
Atteint :2 http://deb.debian.org/debian-security bullseye-security InRelease
Atteint :3 http://deb.debian.org/debian bullseye-updates InRelease
Réception de :4 http://deb.debian.org/debian bullseye-backports InRelease [44,2 kB]
Réception de :5 http://deb.debian.org/debian bullseye-backports/main amd64 Packages [230 kB]
Réception de :6 http://deb.debian.org/debian bullseye-backports/main Translation-en [186 kB]
Réception de :7 http://deb.debian.org/debian bullseye-backports/contrib amd64 Packages [4 696 B]
Réception de :8 http://deb.debian.org/debian bullseye-backports/contrib Translation-en [4 196 B]
Réception de :9 http://deb.debian.org/debian bullseye-backports/non-free amd64 Packages [11,0 kB]
Réception de :10 http://deb.debian.org/debian bullseye-backports/non-free Translation-en [8 252 B]
489 ko réceptionnés en 1s (388 ko/s)                                        
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
4 paquets peuvent être mis à jour. Exécutez « apt list --upgradable » pour les voir.
root@VICTUSG:~#   
Les 4 paquets ont été mis à jour

Mais par contre je n'arrive pas à trouver le nom du pilote ?? rtw89_pci ne semble pas correspondre

Code : Tout sélectionner

 root@VICTUSG:~# apt search rtw89_pci 
En train de trier... Fait
Recherche en texte intégral... Fait
root@VICTUSG:~# 


ou suivant le site dont je me suis inspiré pour le rétroportage : https://wiki.debian.org/fr/Backports

Code : Tout sélectionner

 root@VICTUSG:~# apt show rtw89_pci -a
N: Impossible de trouver le paquet rtw89_pci
E: Aucun paquet n'a été trouvé
root@VICTUSG:~#  
Là j'atteins mes limites sur le sujet et j'ai à nouveau besoin d'aide

Merci d'avance pour votre attention et votre permanence
Cordialement A+
Avatar du membre
dezix
Modérateur
Modérateur
Messages : 1975
Enregistré le : 04 juin 2016, 14:50
Status : Hors ligne

[ÉDITÉ]

Les paquets à passer en backports sont est :
  • linux-image-amd64
  • firmware-realtek
La modif du 1er pourrait (je n'utilise pas les backports habituellement) entraîner la mise à niveau du second et d'un wagon d'autres ???

Excusez-moi j'ai eu une confusion avec le backports de Buster :wacko:
Debian stable - XFCE
Avatar du membre
piratebab
Site Admin
Site Admin
Messages : 3902
Enregistré le : 24 avr. 2016, 18:41
Localisation : sud ouest
Status : Hors ligne

Reprenons les choses dans l'ordre.
On sait que ton device id est 10ec:8852

Pour voir comment ton système actuel le prends en charge:
Avec cet identifiant, on trouve normalement sur internet le driver requis. Mais la page https://deviwiki.com/wiki/List_of_Wi-Fi ... s_in_Linux me renvoit un tableau vide aujourd’hui (ça fait longtemps que je ne l'ai plus utilisé). Vous auriez un lien qui fonctionne ?
La liste des drivrs existant est sur https://wireless.wiki.kernel.org/en/users/Drivers , mais il n'y a pas la liste des devices ID supportés.


Pour voir comment ton système actuel le prends en ton device:

Code : Tout sélectionner

lspci -vv -s 10ec:8852 
Tu devrais voir

Code : Tout sélectionner

kernel module: xxxx
Si il n'y a rien tu dois mettre à jour ton kernel comme déja indiqué.

Pour voir si ce module est chargé:

Code : Tout sélectionner

lsmod
Pour mettre en pratique les explications de dezix, tu peux faire

Code : Tout sélectionner

lsmod | grep "nomdu module"
:wink:


pour avoir des infos sur ce module

Code : Tout sélectionner

modinfo "nom du module"
Tu devrais y trouver les firmware chargés.
PascalHambourg
Contributeur
Contributeur
Messages : 638
Enregistré le : 05 août 2016, 20:25
Status : Hors ligne

dezix a écrit : 07 avr. 2022, 20:32 Comment as-tu déterminé que rtw89 prend en charge ce matériel ?
Attention, je n'ai pas écrit que ce module prend en charge ce matériel mais qu'il reconnaît son identifiant PCI. Comme les fabricants de composants ont parfois la mauvaise idée d'attribuer le même identifiant à des composants différents, ce n'est pas une garantie de prise en charge.

Pour rechercher si un noyau installé a un module pour l'identifiant 10ec:8852 sans avoir le composant dans la machine, j'ai deux méthodes :

Code : Tout sélectionner

grep -i "10ec.*8852" /lib/modules/"<version.du.noyau>"/modules.alias
/sbin/modprobe -S "<version.du.noyau>" -R "pci:v000010ECd00008852sv*sd*bc*sc*i*"
Elles ne sont pas parfaites et peuvent toutes les deux fournir des faux positifs ou négatifs.
Les "lettres" hexadécimales doivent être en majuscules dans la seconde commande.
dezix a écrit : 08 avr. 2022, 12:16 Les paquets à passer en backports sont est :
linux-image-amd64
firmware-realtek
La modif du 1er pourrait (je n'utilise pas les backports habituellement) entraîner la mise à niveau du second
Je ne pense pas. Donc si le module a besoin d'un firmware pour ce contrôleur, il faudra probablement aussi installer le paquet firmware-realtek des backports.

Code : Tout sélectionner

apt-get -t bullseye-backports install linux-image-amd64 firmware-realtek
Répondre