freecad, fermeture du programme au lancement

Demande d'aide : c'est ici.
Répondre
Avatar du membre
debianjam
Membre
Membre
Messages : 273
Enregistré le : 27 août 2017, 14:18
Status : Hors ligne

08 nov. 2020, 20:27

salut
problème avec l'appimage freecad depuis l'installation de trois ateliers optionnels
le programme charge les ateliers et disparait au moment d'ouvrir la fenêtre de travail

Code : Tout sélectionner

utilisateur1@debian:~$ ./Téléchargements/FreeCAD_0.19-22894-Linux-Conda_glibc2.12-x86_64.AppImage                          
FreeCAD 0.19, Libs: 0.19R22894 (Git)                                                                                       
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2020                                                       
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.                                       
FreeCAD wouldn't be possible without FreeCAD community.                                                                    
  #####                 ####  ###   ####                                                                                   
  #                    #      # #   #   #                                                                                  
  #     ##  #### ####  #     #   #  #   #                                                                                  
  ####  # # #  # #  #  #     #####  #   #                                                                                  
  #     #   #### ####  #    #     # #   #                                                                                  
  #     #   #    #     #    #     # #   #  ##  ##  ##                                                                      
  #     #   #### ####   ### #     # ####   ##  ##  ##                                                                      
                                                                                                                           
Loading Assembly4 WorkBench
Interlocking laser cut workbench loaded
Sheet Metal workbench loaded
A3 available
Program received signal SIGSEGV, Segmentation fault.                                                                       
#0  /lib/x86_64-linux-gnu/libc.so.6(+0x37840) [0x7f99ca127840]                                                             
#1  0x7f99ca64734f in QObject::setObjectName(QString const&) from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libQt5Core.so.5+0x7                                                                                                                         
#2  0x7f99cc99934e in Gui::WorkbenchGroup::setWorkbenchData(int, QString const&) from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0xae                                                                                                   
#3  0x7f99cc999b24 in Gui::WorkbenchGroup::refreshWorkbenchList() from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0x524                                                                                                                 
#4  0x7f99cc999c76 in Gui::WorkbenchGroup::addTo(QWidget*) from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0x26                                                                                                                         
#5  0x7f99cc9ac2aa in Gui::CommandManager::addTo(char const*, QWidget*) from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0x20a                                                                                                           
#6  0x7f99ccdd5b49 in Gui::MenuManager::setup(Gui::MenuItem*, QMenu*) const from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0xb59                                                                                                       
#7  0x7f99ccdd63eb in Gui::MenuManager::setup(Gui::MenuItem*) const from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0x3ab                                                                                                               
#8  0x7f99ccdea821 in Gui::Workbench::activate() from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0xa1        
#9  0x7f99ccded4fd in Gui::WorkbenchManager::activate(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0x1d                                                                         
#10  0x7f99cc8e58b6 in Gui::Application::activateWorkbench(char const*) from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0x696                                                                                                           
#11  0x7f99cc8ec743 in Gui::Application::sActivateWorkbenchHandler(_object*, _object*) from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0x73                                                                                             
#12  /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libpython3.8.so.1.0(PyCFunction_Call+0xf7) [0x7f99cc34b2e7]                   
#13  /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libpython3.8.so.1.0(_PyObject_MakeTpCall+0x250) [0x7f99cc301890]              
#14  /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x4ea2) [0x7f99cc38fe62]         
#15  /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x2e2) [0x7f99cc2fe022]          
#16  /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libpython3.8.so.1.0(PyEval_EvalCodeEx+0x44) [0x7f99cc2fede4]                  
#17  /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libpython3.8.so.1.0(PyEval_EvalCode+0x1c) [0x7f99cc3b469c]                    
#18  /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libpython3.8.so.1.0(+0x219ecf) [0x7f99cc3d2ecf]                               
#19  /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libpython3.8.so.1.0(+0x252c44) [0x7f99cc40bc44]                               
#20  /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libpython3.8.so.1.0(PyRun_StringFlags+0x7d) [0x7f99cc40bcdd]                  
#21  0x7f99cbc0b11a in Base::InterpreterSingleton::runString[abi:cxx11](char const*) from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADBase.so+0x6a                                                                                              
#22  0x7f99cc8c7f3b in Gui::Application::runInitGuiScript() from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0x4b                                                                                                                        
#23  0x7f99cc8e8e3e in Gui::Application::runApplication() from /tmp/.mount_FreeCANU81lp/usr/bin/../lib/libFreeCADGui.so+0xeee                                                                                                                         
#24  /tmp/.mount_FreeCANU81lp/usr/bin/freecad(+0x37cd) [0x55579c5577cd]                                                    
#25  /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xeb) [0x7f99ca11409b]                                              
#26  /tmp/.mount_FreeCANU81lp/usr/bin/freecad(+0x4521) [0x55579c558521]                                                    
utilisateur1@debian:~$  
2020/Debian10(buster)64 ; G3.30.2 ; mémoire : 3,7Gio ; i5 3450 @3.10Ghz x4 ; c.g. NV106 (intégrée Intel Ivybridge Desktop) ou asus gt730 2Gio
Avatar du membre
debianjam
Membre
Membre
Messages : 273
Enregistré le : 27 août 2017, 14:18
Status : Hors ligne

09 nov. 2020, 09:56

Salut,
ce matin je tente d'utiliser la dernière version 0.19-22960 (post précédent c'était 0.19-22894)
même résultat la fenêtre de travail disparaît au moment de s'ouvrir
est ce un problème que je dois chercher à éclaircir dans un forum FreeCAD ou bien est ce un problème qui concerne Debian ?
dans le terminal voici le code :

Code : Tout sélectionner

utilisateur1@debian:~$ su
Mot de passe : 
root@debian:/home/utilisateur1# ./Téléchargements/FreeCAD_0.19-22960-Linux-Conda_glibc2.12-x86_64.AppImageFreeCAD 0.19, Libs: 0.19R22960 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2020
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##

[2731:2731:1109/095213.446219:ERROR:zygote_host_impl_linux.cc(89)] Running as root without --no-sandbox is not supported. See https://crbug.com/638180.
root@debian:/home/utilisateur1# exit
exit
utilisateur1@debian:~$ ./Téléchargements/FreeCAD_0.19-22960-Linux-Conda_glibc2.12-x86_64.AppImage
FreeCAD 0.19, Libs: 0.19R22960 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2020
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##

Loading Assembly4 WorkBench
Interlocking laser cut workbench loaded
Sheet Metal workbench loaded
A3 available
Program received signal SIGSEGV, Segmentation fault.
#0  /lib/x86_64-linux-gnu/libc.so.6(+0x37840) [0x7fd074152840]
#1  0x7fd07467234f in QObject::setObjectName(QString const&) from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libQt5Core.so.5+0x7
#2  0x7fd0769c434e in Gui::WorkbenchGroup::setWorkbenchData(int, QString const&) from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0xae                                                                                                   
#3  0x7fd0769c4b24 in Gui::WorkbenchGroup::refreshWorkbenchList() from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0x524                                                                                                                 
#4  0x7fd0769c4c76 in Gui::WorkbenchGroup::addTo(QWidget*) from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0x26                                                                                                                         
#5  0x7fd0769d72aa in Gui::CommandManager::addTo(char const*, QWidget*) from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0x20a                                                                                                           
#6  0x7fd076e00dd9 in Gui::MenuManager::setup(Gui::MenuItem*, QMenu*) const from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0xb59                                                                                                       
#7  0x7fd076e0167b in Gui::MenuManager::setup(Gui::MenuItem*) const from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0x3ab                                                                                                               
#8  0x7fd076e15ab1 in Gui::Workbench::activate() from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0xa1        
#9  0x7fd076e1878d in Gui::WorkbenchManager::activate(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0x1d                                                                         
#10  0x7fd0769108b6 in Gui::Application::activateWorkbench(char const*) from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0x696                                                                                                           
#11  0x7fd076917743 in Gui::Application::sActivateWorkbenchHandler(_object*, _object*) from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0x73                                                                                             
#12  /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libpython3.8.so.1.0(PyCFunction_Call+0xf7) [0x7fd0763762e7]                   
#13  /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libpython3.8.so.1.0(_PyObject_MakeTpCall+0x250) [0x7fd07632c890]              
#14  /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x4ea2) [0x7fd0763bae62]         
#15  /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x2e2) [0x7fd076329022]          
#16  /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libpython3.8.so.1.0(PyEval_EvalCodeEx+0x44) [0x7fd076329de4]                  
#17  /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libpython3.8.so.1.0(PyEval_EvalCode+0x1c) [0x7fd0763df69c]                    
#18  /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libpython3.8.so.1.0(+0x219ecf) [0x7fd0763fdecf]                               
#19  /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libpython3.8.so.1.0(+0x252c44) [0x7fd076436c44]                               
#20  /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libpython3.8.so.1.0(PyRun_StringFlags+0x7d) [0x7fd076436cdd]                  
#21  0x7fd075c3611a in Base::InterpreterSingleton::runString[abi:cxx11](char const*) from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADBase.so+0x6a                                                                                              
#22  0x7fd0768f2f3b in Gui::Application::runInitGuiScript() from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0x4b                                                                                                                        
#23  0x7fd076913e3e in Gui::Application::runApplication() from /tmp/.mount_FreeCAxS7DoY/usr/bin/../lib/libFreeCADGui.so+0xeee                                                                                                                         
#24  /tmp/.mount_FreeCAxS7DoY/usr/bin/freecad(+0x37cd) [0x557aba96c7cd]                                                    
#25  /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xeb) [0x7fd07413f09b]                                              
#26  /tmp/.mount_FreeCAxS7DoY/usr/bin/freecad(+0x4521) [0x557aba96d521]                                                    
utilisateur1@debian:~$  
2020/Debian10(buster)64 ; G3.30.2 ; mémoire : 3,7Gio ; i5 3450 @3.10Ghz x4 ; c.g. NV106 (intégrée Intel Ivybridge Desktop) ou asus gt730 2Gio
Avatar du membre
debianjam
Membre
Membre
Messages : 273
Enregistré le : 27 août 2017, 14:18
Status : Hors ligne

09 nov. 2020, 14:51

solution trouvée : supprimer les trois ateliers nouvellement installés (dossier) du dossier .FreeCAD/Mod
le chargement s'effectue de nouveau correctement et la fenêtre de travail s'ouvre
voir si besoin mon post dans le forum Freecad https://forum.freecadweb.org/viewtopic.php?f=12&t=51993
2020/Debian10(buster)64 ; G3.30.2 ; mémoire : 3,7Gio ; i5 3450 @3.10Ghz x4 ; c.g. NV106 (intégrée Intel Ivybridge Desktop) ou asus gt730 2Gio
Avatar du membre
dezix
Modérateur
Modérateur
Messages : 1119
Enregistré le : 04 juin 2016, 14:50
Diaspora* : dezix@framasphere.org
Status : Hors ligne

09 nov. 2020, 15:07

:006: Merci

@+
Debian testing/stable - XFCE
Répondre